REPLACING A WATERJET NOZZLE
In this video we show how you can conveniently and efficiently replace the waterjet nozzle of an Avonisys waterjet laser head within just minutes.
REPLACING A LASER WINDOW
In this video we show how you can conveniently and efficiently replace the protection window of an Avonisys waterjet laser head within just minutes.
AIR-JET WORKING PRINCIPLE
In this video we explain how Air-Jet shields the waterjet from disturbances and how work pieces cavities are cleared from excess liquid for robust machining.
COUPLING UNIT MAINTENANCE
In this video we show how you can best maintain the coupling unit of a laser head during temporary switch off of the laser machine.
LIGHT GUIDING PRINCIPLE
This video is intended as “light” content with a touch of entertainment to explain the physics of the light guiding capability of waterjets in an easy digestible way.
LIGHT GUIDING PRINCIPLE
A short educational video - to be taken with a grain of salt - that shows that any non-turbulent waterjet, or a portion of it, is suitable for guiding of laser light.
LASER PROCESSING VIDEOS
Cutting of 1000+ square holes (1x1mm) in a 10mm metal plate in a narrow pitch of 0.25mm.
77H NON-STOP “HARD-CORING”
In this video we showcase the longest ever recorded non-stop waterjet laser cutting job to date, while cutting hundreds of thick carbide ceramic rods with micron precision and finish.
12MM SILICON CARBIDE CUTTING
This video showcases the high-aspect cutting capabilities for thick Silicon Carbide material (in this case a sintered SSiC material of approx. 1/2” thickness).
ALUMINUM SHEET CUTTING
Laser cutting of small precision Aluminum parts by the dozen. Simple, fast and completely burr free as-cut.
RAPID BURR FREE CUTTING
Cutting 9mm holes in 0.5mm Aluminum sheet metal cleanly and burr free in a matter of seconds.
SILICON CARBIDE LASER CUTTING
SiC is typically a touch material to machine. In this video we show freeform laser cutting of various tiny, sharp and high-aspect features in 5mm thick SiSiC material.
1MM SQUARE HOLE 18MM DEEP
Laser cutting a 1mm round hole of 18mm deep is a demanding job. To show the unique capability of our system we cut a 1x1mm square hole through 18mm aluminum.
THICK SILICON HOLE DRILLING
In this video we showcase drilling of 100 deep parallel holes into an 8mm thick Silicon disc. Unlike mechanical drilling there is no tool wear or breakage risk.
TIRE MOLD LASER PROCESSING
The Avonisys waterjet laser is an enabling technology for creating a variety of functional micro slots in aluminum and steel tire molds.
CUTTING METAL FOAM
Non-bulk parts can be difficult for a conventional laser to cut. Our waterjet laser can perform precision cutting in a variety of metal foam materials.
MUSIC BY LASER FREQUENCY
Technology should also be fun to work with! We programmed the laser to the tones of “Jingle Bells” and had it cut out small Christmas trees while “playing” it.
ROBUST WATERJET LASER
Precise alignment and part fixation are not always required to get great results. In this video we show how simple it can be to cut parts with an Avonisys system.
MICRO HONEYCOMB CUTTING
Laser cutting of very thin walls can already be a challenge. In this video we up the game by cutting 0.25mm thin walls over a large depth of 18mm.
EDM ALIKE CUT BY LASER
Avonisys waterjet laser systems can cut with EDM alike precision and surface finish, but often in a fraction of the machining time. Both cut out and bulk parts are “good” parts.
HOLE MATRIX DRILLING
In this video we drill a series of 0.8mm diameter holes in a 5mm thick Nickel alloy as used for turbine applications. The process works robust and uninterrupted.
CUTTING 18MM ALUMINUM
Aluminum is typically a difficult material to process with a laser. For Avonisys waterjet laser systems this is a very thankful material allowing deep clean cuts.
CUTTING 10MM SILICON
In this video we demonstrate freeform cutting of 10mm thick Silicon. The technology of course is also very well suited to cut much thinner Silicon material.
BURR FREE CUTTING
In this video we show quick freeform cutting of steel sheet material. The results is completely burr free on the front and the back side of the material.
DEEP CUTTING WITH IR LASER
For years the paradigm was that IR lasers do not pair well with a waterjet process. We challenge this theory and show how we cut 24mm of metal with an IR fiber laser.
MICRO NOZZLE CUTTING
In this video we show how a series of micro slot nozzles are machined with a tiny 0.03mm waterjet guided laser.
Avonisys develops, builds and sells laser systems based on its proprietary waterjet laser technology. Avonisys laser systems are designed to deliver robust performance for demanding applications, while keeping operation simple and maintenance procedures fast and cost effective. Around its core technology Avonisys holds over 30 validated patents and patents pending*, which include unique features such as a high-power laser coupling method, an Air-Jet protection system and an easy-maintenance laser coupling unit design.
* Patents in Avonisys AG / shareholder portfolio:
US8859988B1, US9085114B2, US10022820B2, US10092980B1, US10272522B2, US10279429B2, US10307864B2, EP1940579B1, EP3092119B1, EP3105003B1, EP3105043B1, EP3482921B1, CN206925459U, CN206926280U, CN107530828B and patents pending.
6300 Zug, Switzerland
Tel. +41 41 229 48 73
Fax +41 41 229 48 74